Picture this. You open your Audi's door in the evening, and the four rings light up on the ground. Such a small detail, but it looks brilliant! Audi LED door projectors are one of those little accessories that make your car feel more like your own. And the nice thing is, they're really easy to fit on many models. But here's the catch: not all of them.
What are Audi LED door projectors?
They're small lights that replace the ones at the bottom of your doors. Open the door, and a logo or message appears on the ground: the Audi rings, the S logo, e-tron or Vorsprung durch Technik. And they're not just there to look good. They light up the ground where you're stepping and help other drivers notice you.
Which Audi models are easy to fit LED door projectors to?
If your Audi already has lights at the bottom of its doors, fitting the projectors is usually straightforward. Remove the old light, plug in the new projector, and you're done. No extra wiring, no modifications. But be careful: not every projector fits every Audi. You'll find the compatible models and model years in the product description. If you're not sure whether one will fit your car, send us your VIN and we'll check for you.
What if your Audi doesn't have door lights?
That's where things get a little more involved. There's no existing light to swap, so we need to run wiring into the door and sometimes code the control module as well. That's called a retrofit, and it's something we do at Das Auto Service. But there's one thing I'm very particular about: no bodged wiring. We use genuine wiring and connectors without cutting into the factory wiring loom. Because one incorrectly connected wire can cause all sorts of electrical problems. And guess who's paying to put them right? You are.
Don't rush out and buy the cheapest projectors you can find from some unknown manufacturer. We've seen what happens with these accessories. After a few months, the logo starts fading, the projectors get hot, and their different power consumption can even trigger faults in the door control module. You think you've saved a bit of money on the projectors, only to end up paying for diagnostics. I'm telling you this because I'd rather save you the hassle.
How do we fit LED door projectors?
- First, we carefully remove the existing light using a plastic trim removal tool so we don't scratch the door trim.
- We disconnect the factory connector and plug the new projector into its place.
- We check that the logo is sharp, clearly visible and correctly aligned.
- If necessary, we code the door control module and check for fault codes.
A tip from Kris Mladenov: If you're thinking of buying Audi LED door projectors as a gift, first check whether the car already has lights at the bottom of its doors. If it does, fitting them could take just five minutes, and the person you're buying them for won't even need to visit a workshop.
Fancy seeing the Audi rings light up on the ground every time you open your door? Have a look at the LED projectors in our shop. And if you're not sure which ones fit your Audi, just send us your VIN. We'll check compatibility so you don't waste money on something you can't actually fit.
Our picks from the shop
Audi LED door projectors with the four-ring Audi logo
Genuine LED door projectors featuring the Audi rings. They fit directly in place of the factory-fitted door lights.
View in shop
Audi LED door projectors with S logo
LED door projectors featuring the S logo. A great choice if you drive an Audi S model or simply fancy giving your car a slightly sportier look.
View in shop
Audi LED door projectors with e-tron logo
LED door projectors featuring the e-tron logo. Just the thing if you drive one of Audi's electric models.
View in shopRead more
- Retrofitting at Das Auto Service
- Electrical problems and control modules
- Retrofitting Virtual Cockpit, cameras and lights to factory standard
- What should I buy as a gift for an Audi or VW owner?
- Component Protection: why won't a control module from another car work?
Frequently asked questions
Do Audi LED door projectors need coding?
If your Audi already has factory-fitted door lights, usually not. Just swap the existing light for the projector and you're done. If your car doesn't have door lights, that's a retrofit, and sometimes the door control module needs coding too.
Do LED door projectors fade over time?
Genuine ones are built to last for years. With cheap aftermarket replacements, though, the logo often fades much sooner. That's why I always tell you to be careful about what you fit to your car.
Can I fit LED door projectors myself?
If your Audi already has door lights, absolutely. Just be careful when removing the old light so you don't scratch the door trim. If there's no factory-fitted lighting, you're better off bringing the car to the workshop. That involves running wiring through the door and sometimes coding the control module.